Welcome to: Rudong Tianyi laser equipment factory 中文  |  English

Quality as guarantee

To the credibility of service for the pilot

Contact us
15371750731
PRODUCT
PRODUCT CENTER
SERVICE PHONE
15371750731

Position： Home >

Solution of yellowing of laser cutting fabric

Many customers who cut cloth materials are very troublesome when laser cutting cloth is cut yellow. Adjusting cutting speed, laser power and blowing power rate is useless. So what is the cause of yellowing?

The laser has a very high collimation degree, like a light knife, which can quickly cut off the cloth. After cutting, the edge of the incision will become yellow. The reason is that the laser tube has clutter, which is not linear enough and collimation is not high.
This is a problem that most domestic laser tube manufacturers fail to solve. Popularly speaking, it is like a knife for cutting cloth, a sharp knife should be cut without leaving a clutter, and a knife with a burr, and a smooth knife should be cut around the incision.
There will be a hook.

In the end, it is still the problem of laser tube production process. During the production process of the day 1 laser nearly 20 years, after many experiments and tests, the problem of such headaches was finally solved. The latest 130W small spot type excitation
Light tube, further improve the collimation degree, laser taper, narrow the light spot, in cutting flying fabric, cloth, leather, acrylic, faster, smooth incision without burr, no yellow.
Copyright © 1998 - 2018 TianYiLaser. All Rights Reserved.Tianyi laser ｜CO2 laser tube wholesale｜CO2 laser lens wholesale
phone：15371750731  SeatMachine：0513-81959986 Address:jiang su ru dong xian ju zhen dong hai gong ye qu 360 hao  
网站备案/许可证号：苏ICP备09087982号
Tel

15371750731